Product specifications
Fully flat integration in standard architectural ceiling tiles, leaving only 8mm
Remarkable blend of iconic design and engineering excellence with an elegant finish in white or a combination of silver and white
Combining with R-32 Bluevolution technology, reduces environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has up to lower 16% refrigerant charge
Two optional intelligent sensors improve energy efficiency and comfort
Individual flap control: flexibility to suit every room layout without changing the location of the unit!
Unified indoor unit range for R-32 and R-410A
Reduced energy consumption thanks to specially developed small tube heat exchanger, DC fan motor and drain pump
Optional fresh air intake
Branch duct discharge allows to optimize air distribution in irregular shaped rooms or to supply air to small adjacent rooms
Standard drain pump with 630mm lift increases flexibility and installation speed
This unit can be used in combination with following unit(s)
- FFA-A9 / 3MXM-N
- FFA-A9 / 5MXM-N
- FFA-A9 / RZAG-A
- FFA-A9 / RZAG-MV1
Benefits
Floor & presence sensor
The presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor.
Home leave operation
During absence, the indoor temperature can be maintained at your specified comfort level during absence.
Draught prevention
When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
Individual flap control
Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well.
Inverter technology
Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
Fan only
The air conditioner can be used as fan, blowing air without cooling or heating.
Auto cooling-heating changeover
Automatically selects cooling or heating mode to achieve the set temperature (heat pump types only).
Whisper quiet
Daikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet of the neighbourhood. (with sound levels as low as 19dBA)
Ceiling soiling prevention
A special function prevents air blowing out too long in horizontal position, to prevent ceiling stains.
Vertical auto swing
Possibility to select automatic vertical moving of the air discharge louvre, for uniform air flow and temperature distribution.
Fan speed steps
Allows to select up to the given number of fan speed.
Dry programme
Allows humidity levels to be reduced without variations in room temperature.
Air filter
Removes airborne dust particles to ensure a steady supply of clean air.
Weekly timer
Timer can be set to start operation anytime on a daily or weekly basis
Infrared remote control
Infrared remote control with LCD to start, stop and regulate your indoor unit from a distance.
Wired remote control
Wired remote control to start, stop and regulate the air conditioner from a distance.
Centralised control
Centralised control to start, stop and regulate several indoor units from one central point.
Online контроллер с помощью специальной программы
Auto-restart
The unit restarts automatically at the original settings after power failure
Self-diagnosis
Simplifies maintenance by indicating system faults or operating anomalies.
Drain pump kit
Facilitates condensation draining from the indoor unit.
Twin/triple/double twin application
2, 3 or 4 indoor units can be connected to only 1 outdoor unit. All indoor units operate within the same mode (cooling or heating) from one remote control.
Multi model application
Up to 5 indoor units (even different capacities) can be connected to a single outdoor unit. All indoor units can individually be operated within the same mode.
Infrastructure cooling
Remove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.