Product specifications
Guaranteed heating capacity at low ambient temperature, down to -25°C
Seasonal efficiency values up to A+++ in cooling and heating
When installed close to a heating device (e.g. fire place or oven) and the set temperature is reached, the fan keeps on running to have an even temperature throughout the whole house
Cleaner air thanks to Daikin’s Flash Streamer technology: you can breathe deep with no worries about impure air
Online controller (optional): control your indoor from any location with an app, via your local network or internet and keep an overview on your energy consumption
2 area motion detection sensor: air flow is sent to a zone other than where the person is located at that moment; if no people are detected, the unit will automatically switch over to the energyefficient setting.
3-D air flow combines vertical and horizontal auto swing to circulate a stream of warm or cool air right to the corners of even large spaces
Sleek, unobtrusive air conditioning unit that matches European sensibilities regarding interior design
Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A and leads directly to lower energy consumption thanks to its high energy efficiency
Benefits
2 area motion detection sensor
Air flow is sent to a zone other than where the person is located at that moment. Detection is done in 2 directions: left and right. If no people are detected, the unit will automatically switch over to the energy-efficient setting.
Fireplace logic
When installed close to a heating device (e.g. fireplace or oven) and the set temperature is reached, the fan keeps on running to have an even temperature throughout the whole house
Guaranteed operation down to -25°C
Daikin heat pumps are suitable for all climates, even withstanding severe winter conditions with an operation range down to -25°C
Online controller via app
Control your indoor unit from any location via app.
(optional WLAN adapter)
Impossible to hear
Practically inaudible: the unit runs so quietly, you will almost forget it is there.
Econo mode
This function decreases the power consumption so that other applicances that need large power consumption can be used. This function is also energy saving.
Energy saving during operation standby
Current consumption is reduced by about 80 % when operating on standby.
Night set mode
Saves energy, by preventing overcooling or overheating during night time.
Fan only
The air conditioner can be used as fan, blowing air without cooling or heating.
Comfort mode
The unit automatically changes the angle of the air discharge louvre depending on the mode. In cooling operation the air will be directed rather upwards to avoid cold draught, while in heating operation the air will be directed rather downwards to avoid cold feet.
Powerful mode
If the temperature in the room is too high/low, it can be cooled down/heated quickly by selecting the ‘powerful mode’. After the powerful mode is turned off, the unit returns to the preset mode.
Auto cooling-heating changeover
Automatically selects cooling or heating mode to achieve the set temperature (heat pump types only).
Indoor unit silent operation
To ensure a quiet environment for studying or sleeping the user can lower the operation sound of the indoor unit by 3 dB(A) via remote control.
Outdoor unit silent operation
To ensure a quiet environment for the neighbourhood the user can lower the operation sound of the outdoor unit by 3 dB(A) via remote control.
3-D Air flow
This function combines Vertical and Horizontal auto-swing to circulate a stream of cool/warm air right to the corners of even large spaces.
Vertical auto swing
Possibility to select automatic vertical moving of the air discharge louvre, for uniform air flow and temperature distribution.
Horizontal auto swing
Possibility to select automatic horizontal moving of the air discharge louvre, for uniform air flow and temperature distribution.
Auto fan speed
Automatically selects the necessary fan speed to reach or maintain the set temperature.
Fan speed steps
Allows to select up to the given number of fan speed.
Dry programme
Allows humidity levels to be reduced without variations in room temperature.
Flash Streamer
Generates high speed electrons that powerfully breaks down odours and allergens.
Weekly timer
Timer can be set to start operation anytime on a daily or weekly basis
24 Hour timer
Timer can be set to start cooling/heating anytime during a 24-hour period.
Infrared remote control
Infrared remote control with LCD to start, stop and regulate your indoor unit from a distance.
Wired remote control
Wired remote control to start, stop and regulate the air conditioner from a distance.
Centralised control
Centralised control to start, stop and regulate several indoor units from one central point.
Auto-restart
The unit restarts automatically at the original settings after power failure.
Self-diagnosis
Simplifies maintenance by indicating system faults or operating anomalies.
Gallery
| FTXTM-R + RXTM-R | 30R + 30R | 40R + 40R | |
|---|---|---|---|
| Cooling capacity Min./Nom./Max. kW | 0,70/3,00/4,50 | 0,70/4,00/5,10 | |
| Heating capacity Min./Nom./Max. kW | 0,80/3,20/6,70 | 0,80/4,00/7,20 | |
| Space cooling | Energy effciency class | A++ | |
| Space heating (Average climate) | Energy effciency class | A+++ | |
| Dimensions. Indoor unit. HхWхD мм | 294x811x272 | 300x1.040x295 | |
| Dimensions. Outdoor unit. HхWхD мм | 551x763x312 | ||
| Weight. Outdoor unit. kg | 38 | ||
| Operation range | Cooling Ambient Min.~Max. °CDB | -10~46 | |
| Heating Ambient Min.~Max. °CWB | -25~18 | ||
| Refrigerant | Type | R-32 | |